9 tacmicrochip ? standard microchip the worlds smallest surface mount tantalum capacitor, small enough to create space providing room for ideas to grow. tacmicrochip ? is a major breakthrough in miniaturization without reduction in performance. it offers you the highest energy store in a small case size down to 0402; enhanced high frequency operation through unique esr performance with temperature and voltage stability is also offered. l slt w h polarity band not to exceed center line tac type tacmicrochip ? l case size 1206=a 1210=b 0402=k 0603=l 0805=r 226 capacitance code pf code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) m tolerance k=10% m=20% ta alternative characters may be used for special requirements how to order r packaging (see table below) standard standard reel tin termination tin termination gold termination size plastic tape plastic tape plastic tape case a/b/r/l k a/b/r/l 7" rta pta ata 4 1 ? 4 " xta qta fta packaging suffix technical data: all technical data relate to an ambient temperature of +25c capacitance range: 0.47 f to 150 f capacitance tolerance: 10%; 20% leakage current dcl: 0.01cv or 0.5a whichever is the greater rated voltage (v r ) +85c: 2 3 4 5 6.3 10 16 20 25 category voltage (v c ) +125c: 1.3 2 2.7 3.3 4 7 10 13 17 surge voltage (v s ) +85c: 2.7 3.9 5.2 6.5 8 13 20 26 32 surge voltage (v s ) +125c: 1.7 2.6 3.2 4 5 8 12 16 20 temperature range: -55c to +125c reliability: 1% per 1000 hours at 85c, v r with 0.1 /v series impedance, 60% confidence level termination finish: nickel and tin plating (standard), nickel and gold plating option available upon request technical specifications 004 rated dc voltage 002=2vdc 003=3vdc 004=4vdc 005=5vdc 006=6.3vdc 010=10vdc 016=16vdc 020=20vdc 025=25vdc % % % case dimensions: millimeters (inches) minimum code eia eia length (l) width (w) height (h) termination termination average code metric spacing(s) length (lt) mass a 1206 3216-18 3.20 0.20 1.60 0.20 1.60 0.20 1.80 min. 0.15 44.6mg (0.126 0.008) (0.063 0.008) (0.063 0.008) (0.071 min.) (0.006) b 1210 3528-15 3.50 2.80 1.50 max. 2.00 min. 0.15 min. 90.0mg (0.138 ) (0.110 ) k 0402 1005-07 1.00 0.50 0.50 0.40 min. 0.10 2.0mg (0.039 ) (0.020 ) (0.020 ) (0.016 min.) (0.004) l 0603 1608-10 1.60 0.85 0.85 0.55 min. 0.15 8.6mg (0.063 ) (0.033 ) (0.033 ) (0.022 min.) (0.006) r 0805 2012-15 2.00 1.35 1.35 0.70 min. 0.15 29.9mg (0.079 ) (0.053 ) (0.053 ) (0.027 min.) (0.006) +0.20 -0.00 +0.008 -0.000 +0.20 -0.00 +0.008 -0.000 +0.20 -0.20 +0.008 -0.008 +0.20 -0.10 +0.008 -0.004 +0.20 -0.00 +0.008 -0.000 +0.20 -0.00 +0.008 -0.000 +0.20 -0.00 +0.008 -0.000 +0.15 -0.00 +0.006 -0.000 +0.15 -0.00 +0.006 -0.000 +0.15 -0.00 +0.006 -0.000 +0.15 -0.00 +0.006 -0.000
10 capacitance voltage rating dc (v r ) at 85c f code 2.0v 3.0v 4.0v 6.3v 10v 16v 20v 25v 0.10 104 k 0.15 154 0.22 224 0.33 334 0.47 474 k (m) /l l 0.68 684 k (m) /l l 1.0 105 k/l k/l l r 1.5 155 l l l 2.2 225 k (m) /l l k (m) /l l l 3.3 335 k (m) /l k (m) /l l l l/r r (m) 4.7 475 k (m) /l k (m) /l l l l/r r (m) a 6.8 685 k (m) /l l l l/r l/r 10 106 k (m) /l l j/l/r l (m) /r l/r r 15 156 r l (m) /r l (m) /r r 22 226 r l (m) /r l (m) /r r r 33 336 r r r r r (m) /a (m) / b 47 476 r r r r (m) /a b 68 686 r (m) r (m) a (m) a (m) 100 107 r (m) /a (m) r (m) /a (m) a (m) 150 157 a (m) 220 227 standard commercial range (eia sizes) (letter denotes case size) tacmicrochip ? standard microchip developmental ratings - subject to change released codes (m tolerance only) standard height profile: a, b, k, l, r case low profile: h, j, t, u, v case
11 tacmicrochip ? standard microchip rated dcl df esr avx eia eia case cap voltage (a) % max. ( ) part no. code metric size (f) (v) max. max. @100khz tack335m002# 0402 1005-07 k 3.3 2 0.5 8 15 tacl335*002# 0603 1608-10 l 3.3 2 0.5 6 7.5 tack475m002# 0402 1005-07 k 4.7 2 0.5 12 15 tacl475*002# 0603 1608-10 l 4.7 2 0.5 6 7.5 tack685m002# 0402 1005-07 k 6.8 2 0.5 20 15 tacl685*002# 0603 1608-10 l 6.8 2 0.5 6 7.5 tack106m002# 0402 1005-07 k 10 2 0.5 15 15 tacl106*002# 0603 1608-10 l 10 2 0.5 10 7.5 tacr226*002# 0805 2012-15 r 22 2 0.5 8 5 tacr336*002# 0805 2012-15 r 33 2 0.7 10 5 tacr476*002# 0805 2012-15 r 47 2 0.9 10 5 tacr686m002# 0805 2012-15 r 68 2 1.4 14 5 taca157m002# 1206 3216-18 a 150 2 3 20 1 tack225m003# 0402 1005-07 k 2.2 3 0.5 6 15 tacl225*003# 0603 1608-10 l 2.2 3 0.5 6 7.5 tack335m003# 0402 1005-07 k 3.3 3 0.5 8 15 tacl335*003# 0603 1608-10 l 3.3 3 0.5 6 7.5 tack475m003# 0402 1005-07 k 4.7 3 0.5 12 15 tacl475*003# 0603 1608-10 l 4.7 3 0.5 6 7.5 tacl685*003# 0603 1608-10 l 6.8 3 0.5 6 7.5 tacl106*003# 0603 1608-10 l 10 3 0.5 10 7.5 tacr156*003# 0805 2012-15 r 15 3 0.5 8 5 tacl226m003# 0603 1608-10 l 22 3 0.7 20 7.5 tacr226*003# 0805 2012-15 r 22 3 0.7 8 5 tacr336*003# 0805 2012-15 r 33 3 1 10 5 tacr476*003# 0805 2012-15 r 47 3 1.5 10 5 tacr686m003# 0805 2012-15 r 68 3 2 14 5 taca107m003# 1206 3216-18 a 100 3 3 15 1 tacr107m003# 0805 2012-15 r 100 3 3 30 5 tacl155*004# 0603 1608-10 l 1.5 4 0.5 6 7.5 tacl225*004# 0603 1608-10 l 2.2 4 0.5 6 7.5 tacl335*004# 0603 1608-10 l 3.3 4 0.5 6 7.5 tacl475*004# 0603 1608-10 l 4.7 4 0.5 6 7.5 tacl685*004# 0603 1608-10 l 6.8 4 0.5 8 7.5 tacl106*004# 0603 1608-10 l 10 4 0.5 10 7.5 tacr106*004# 0805 2012-15 r 10 4 0.5 8 5 tacl156m004# 0603 1608-10 l 15 4 0.6 20 7.5 tacr156*004# 0805 2012-15 r 15 4 0.6 8 5 tacl226m004# 0603 1608-10 l 22 4 0.9 20 7.5 tacr226*004# 0805 2012-15 r 22 4 0.9 8 5 tacr336*004# 0805 2012-15 r 33 4 1.3 10 5 tacr476*004# 0805 2012-15 r 47 4 1.9 14 5 taca686m004# 1206 3216-18 a 68 4 2.7 15 1 taca107m004# 1206 3216-18 a 100 4 4 20 1 tacr107m004# 0805 2012-15 r 100 4 4 30 5 tack105*006# 0402 1005-07 k 1 6.3 0.5 6 15 tacl105*006# 0603 1608-10 l 1 6.3 0.5 6 7.5 tacl155*006# 0603 1608-10 l 1.5 6.3 0.5 6 7.5 rated dcl df esr avx eia eia case cap voltage (a) % max. ( ) part no. code metric size (f) (v) max. max. @100khz tack225m006# 0402 1005-07 k 2.2 6.3 0.5 8 15 tacl225*006# 0603 1608-10 l 2.2 6.3 0.5 6 7.5 tacl335*006# 0603 1608-10 l 3.3 6.3 0.5 6 7.5 tacl475*006# 0603 1608-10 l 4.7 6.3 0.5 8 7.5 tacl685*006# 0603 1608-10 l 6.8 6.3 0.5 10 7.5 tacr685*006# 0805 2012-15 r 6.8 6.3 0.5 8 5 tacl106m006# 0603 1608-10 l 10 6.3 0.6 10 6 tacr106*006# 0805 2012-15 r 10 6.3 0.6 8 5 tacl156m006# 0603 1608-10 l 15 6.3 0.9 20 7.5 tacr156*006# 0805 2012-15 r 15 6.3 0.9 8 5 tacr226*006# 0805 2012-15 r 22 6.3 1.4 10 5 tacr336*006# 0805 2012-15 r 33 6.3 2.1 12 5 tacr476m006# 0805 2012-15 r 47 6.3 3 20 5 taca476*006# 1206 3216-18 a 47 6.3 3 15 1 taca686m006# 1206 3216-18 a 68 6.3 4.3 15 1 taca107m006# 1206 3216-18 a 100 6.3 6.3 20 1 tack474m010# 0402 1005-07 k 0.47 10 0.5 6 15 tacl474*010# 0603 1608-10 l 0.47 10 0.5 6 7.5 tack684m010# 0402 1005-07 k 0.68 10 0.5 8 15 tacl684*010# 0603 1608-10 l 0.68 10 0.5 6 7.5 tack105*010# 0402 1005-07 k 1 10 0.5 6 15 tacl105*010# 0603 1608-10 l 1 10 0.5 6 7.5 tacl155*010# 0603 1608-10 l 1.5 10 0.5 6 7.5 tacl225*010# 0603 1608-10 l 2.2 10 0.5 6 7.5 tacl335*010# 0603 1608-10 l 3.3 10 0.5 8 7.5 tacr335*010# 0805 2012-15 r 3.3 10 0.5 8 5 tacl475*010# 0603 1608-10 l 4.7 10 0.5 10 6 tacr475*010# 0805 2012-15 r 4.7 10 0.5 8 6 tacl685*010# 0603 1608-10 l 6.8 10 0.7 20 7,5 tacr685*010# 0805 2012-15 r 6.8 10 0.7 8 5 tacl106*010# 0603 1608-10 l 10 10 1 20 7.5 tacr106*010# 0805 2012-15 r 10 10 1 8 5 tacr156*010# 0805 2012-15 r 15 10 1.5 10 5 tacr226*010# 0805 2012-15 r 22 10 2.2 14 5 taca336m010# 1206 3216-18 a 33 10 3.3 12 1 tacb336*010# 1210 3528-15 b 33 10 3.3 15 1 tacr336m010# 0805 2012-15 r 33 10 3.3 20 5 tacb476*010# 1210 3528-15 b 47 10 4.7 15 1 tacl474*016# 0603 1608-10 l 0.47 16 0.5 6 7.5 tacl684*016# 0603 1608-10 l 0.68 16 0.5 6 7.5 tacl105*016# 0603 1608-10 l 1 16 0.5 6 7.5 tacl225*016# 0603 1608-10 l 2.2 16 0.5 10 7.5 tacr106*016# 0805 2012-15 r 10 16 1.6 10 5 tack104*020# 0402 1005-07 k 0.10 20 0.5 6 15 tacr335m020# 0805 2012-15 r 3.3 20 0.7 8 5 tacr475m020# 0805 2012-15 r 4.7 20 0.9 8 5 tacr105*025# 0805 2012-15 r 1 25 0.5 8 5 taca475*025# 1206 3216-18 a 4.7 25 1.2 8 1 all technical data relates to an ambient temperature of +25c. capacitance and df are measured at 120hz, 0.5v rms with a maximum dc bias of 2.2 volts. dcl is measured at rated voltage after 5 minutes. * insert k for 10% and m for 20% capacitance tolerance # refer to packaging suffix for options note: avx reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.
|
